3 thoughts on “Solid wood floor production process”
Geoffrey
Step 1: The selection of logs of log
Is that good wood can produce good floors. The quality of log quality on the floor quality is very important. The quality control of a good brand is began to check from the selection of logs. Good wood is the foundation of the production of high -quality floor
Step 2: Rapid wood rotation dry n The quality of the solid wood core plate of the multi -layer solid wood composite floor substrate is inseparable from the quality of the solid wood core board. The solid wood core plate of the rotation is about 1.5 mm thick, and it takes a period of time to dry after the rotation is cut.
It Step 3: Solid wood core boards
In order to ensure the quality of each floor, regular manufacturers usually only choose thin thickness, moderate thickness, no defects, no broken break As a floor substrate, the solid wood core board is selected by a full -time sorting staff.
It Step 4: Core plate coating patchwork
Profenging equipment to operate, which can ensure that the amount of glue is uniform and improve the efficiency of glue. The 8-10 layer of the thin wood core plate is arranged in an orderly manner in an orderly manner and staggered, and the bonding can be changed to change the original extension direction of the wood fiber. It is this step that completely improves the limitations of the dampness and shrinkage of solid wood.
The fifth step: the core plate thermal pressure glue
The heat pressure is an important process in the production process of solid wood composite floor, which is directly related to the quality of the finished product. The hot pressure equipment adopted by large factories is relatively advanced, and the production management personnel are monitored throughout the process, so the quality of the product is relatively stable.
Step 6: The substrate fixed sand light
In large fixed thick sand light machine to the surface of the floor substrate to set the thick sand light The flatness and smoothness of the surface, thereby improving the accuracy of the product and providing a reliable guarantee for the pressed stickers of the precious tree species of the decorative surface layer.
Step 7: The base material is sorted by health
The floor substrate should be carefully selected by the special person to remove the unqualified products. After high temperature and high pressure, there is a large internal stress inside the substrate. This internal stress needs to be released for about 15 days to 20 days, so that the substrate is balanced and stable. This process is called breeding.
Step 8: Selecting solid wood dough
M multi -layer solid wood composite floor is mostly used in the northern dry environment, so the stability of the size is the key. In order to prevent cracking such as cracking during the dry heating season, the precious wooden species of the large -scale solid wood composite floor surface are selected by professional quality inspectors, and the water content control is extremely strict.
Step ninth: floor plate blank
The selected selected wooden leather single pieces with environmentally friendly plastic stickers on the floor substrate, and then enter the advanced heat compressor The heat pressure is performed to make a qualified multi -layer solid wood composite floor blank.
Step tenth: Floor plate blanks
It because the floor substrate is decorated with wooden skin and passes through heat pressure, the inside of the board blanks generates a large internal stress and generates a large internal stress. Such a floor board blank needs to quietly set up health in the balance of heights and humidity for about 20 days to ensure that the floor quality is more stable.
Step 11: Floor cutting slot
After health, the blank will cut through the slot equipment. The good or bad groove is of great significance to the stitching of the finished floor. Therefore, most of the large domestic enterprises have introduced imported cutting equipment in Germany to ensure quality.
Step twelfth: The paint is dry and dry
It the floor of the groove will be passed through the paint equipment. After the eight bottom paint and four -faced paint, the surface paint surface of the finished floor will be moist and tough. After that, just sort the packaging, the entire production process is over.
How to change from a towering tree into a solid wood floor? There are many professional production processes. Knowledge of solid wood floor production process: 1, selection processing The logs or plate blanks of solid wood flooring are imported from Southeast Asia, South America, Africa and other places. More than a month. After importing the logs, it should be peeled, sawed, and sideways into a specification board blank, and then stacked stacked and dry naturally. 2. The water content control . Even if it is imported, the water content is also very high (the anti -board is cracked), it must be stacked and dry, the kiln is dry, and then balanced. This process of the water content of the plate from 30%to 90%to about 15%is processed. Depending on the different types of materials, seasons, venues, and process equipment, it takes 2 weeks and it takes 3 to 4 months. If it is the teak blasting plate, it will be exposed to the sun in the sunny weather for 10 to 30 days, and it will be golden and beautiful. 3, mechanical processing The next is the floor mechanical processing process. The basic process is: plate blank test (measuring water containing rate, color division, division, etc.) → sand light → split color → repair → sand light → open back slot → open venomal slot The difference between a solid wood flooring natural individual determines that the above processes are not suitable for continuous processing of the production line. They are intermittent operations. Each board must be tested through a targeted appearance and size quality in each process. Repairing, rework, downshift and other treatment. This process took 2 to 3 days. 4, floor paint process The basic process is: plate surface repair → anti -crack oil → slot tenon color closure → sand light → supplementary putty → UV curing → sand light → attached base oil → dry and curing → 上封闭底漆→ 干燥固化→上底漆→ UV固化→ 砂光→ 上底漆→ UV固化→ 砂光→上底漆→ UV固化→ 砂光→上底色→UV固化→ 上底漆→ UV curing → sand light → paint paint → UV curing → rolling paint → paint → UV curing → upper high performance surface paint → UV curing → split points, code → packaging → according to standards → qualified products → leave the factory → leave the factory → leave the factory → leave the factory → leave the factory → leave the factory → leave the factory → leave the factory → leave the factory → leave the factory → leave the factory → leave the factory → leave the factory → leave the factory → leave factory Essence The process took 3 to 5 days.
Professional production process of sports wooden floor panels: 1, screening panel In Sports wood flooring with unlimited scars, decaying, insect eyes, collapsed, and small color difference; 2, panel drying In order to regulate the balanced moisture content of sports wooden floors, it is necessary to dry the rough wood plate with a large humidity. Sports wood flooring at the grassroots level and waterproof protection installation of the panel head should be staggered and should be relatively well -properly uniformly kept to cook, abandoned and insect -proof; The machine is polished on the drying wooden floor panel; 4, anticorrosive treatment This wood floor panels should be anticorrosive, such as coating anticorrosive coatings. Sports wooden floor panels also need to do termites prevention measures to ensure ant ants.
Step 1: The selection of logs of log
Is that good wood can produce good floors. The quality of log quality on the floor quality is very important. The quality control of a good brand is began to check from the selection of logs. Good wood is the foundation of the production of high -quality floor
Step 2: Rapid wood rotation dry
n The quality of the solid wood core plate of the multi -layer solid wood composite floor substrate is inseparable from the quality of the solid wood core board. The solid wood core plate of the rotation is about 1.5 mm thick, and it takes a period of time to dry after the rotation is cut.
It Step 3: Solid wood core boards
In order to ensure the quality of each floor, regular manufacturers usually only choose thin thickness, moderate thickness, no defects, no broken break As a floor substrate, the solid wood core board is selected by a full -time sorting staff.
It Step 4: Core plate coating patchwork
Profenging equipment to operate, which can ensure that the amount of glue is uniform and improve the efficiency of glue. The 8-10 layer of the thin wood core plate is arranged in an orderly manner in an orderly manner and staggered, and the bonding can be changed to change the original extension direction of the wood fiber. It is this step that completely improves the limitations of the dampness and shrinkage of solid wood.
The fifth step: the core plate thermal pressure glue
The heat pressure is an important process in the production process of solid wood composite floor, which is directly related to the quality of the finished product. The hot pressure equipment adopted by large factories is relatively advanced, and the production management personnel are monitored throughout the process, so the quality of the product is relatively stable.
Step 6: The substrate fixed sand light
In large fixed thick sand light machine to the surface of the floor substrate to set the thick sand light The flatness and smoothness of the surface, thereby improving the accuracy of the product and providing a reliable guarantee for the pressed stickers of the precious tree species of the decorative surface layer.
Step 7: The base material is sorted by health
The floor substrate should be carefully selected by the special person to remove the unqualified products. After high temperature and high pressure, there is a large internal stress inside the substrate. This internal stress needs to be released for about 15 days to 20 days, so that the substrate is balanced and stable. This process is called breeding.
Step 8: Selecting solid wood dough
M multi -layer solid wood composite floor is mostly used in the northern dry environment, so the stability of the size is the key. In order to prevent cracking such as cracking during the dry heating season, the precious wooden species of the large -scale solid wood composite floor surface are selected by professional quality inspectors, and the water content control is extremely strict.
Step ninth: floor plate blank
The selected selected wooden leather single pieces with environmentally friendly plastic stickers on the floor substrate, and then enter the advanced heat compressor The heat pressure is performed to make a qualified multi -layer solid wood composite floor blank.
Step tenth: Floor plate blanks
It because the floor substrate is decorated with wooden skin and passes through heat pressure, the inside of the board blanks generates a large internal stress and generates a large internal stress. Such a floor board blank needs to quietly set up health in the balance of heights and humidity for about 20 days to ensure that the floor quality is more stable.
Step 11: Floor cutting slot
After health, the blank will cut through the slot equipment. The good or bad groove is of great significance to the stitching of the finished floor. Therefore, most of the large domestic enterprises have introduced imported cutting equipment in Germany to ensure quality.
Step twelfth: The paint is dry and dry
It the floor of the groove will be passed through the paint equipment. After the eight bottom paint and four -faced paint, the surface paint surface of the finished floor will be moist and tough. After that, just sort the packaging, the entire production process is over.
How to change from a towering tree into a solid wood floor? There are many professional production processes. Knowledge of solid wood floor production process:
1, selection processing
The logs or plate blanks of solid wood flooring are imported from Southeast Asia, South America, Africa and other places. More than a month. After importing the logs, it should be peeled, sawed, and sideways into a specification board blank, and then stacked stacked and dry naturally.
2. The water content control
. Even if it is imported, the water content is also very high (the anti -board is cracked), it must be stacked and dry, the kiln is dry, and then balanced. This process of the water content of the plate from 30%to 90%to about 15%is processed. Depending on the different types of materials, seasons, venues, and process equipment, it takes 2 weeks and it takes 3 to 4 months. If it is the teak blasting plate, it will be exposed to the sun in the sunny weather for 10 to 30 days, and it will be golden and beautiful.
3, mechanical processing
The next is the floor mechanical processing process. The basic process is: plate blank test (measuring water containing rate, color division, division, etc.) → sand light → split color → repair → sand light → open back slot → open venomal slot
The difference between a solid wood flooring natural individual determines that the above processes are not suitable for continuous processing of the production line. They are intermittent operations. Each board must be tested through a targeted appearance and size quality in each process. Repairing, rework, downshift and other treatment. This process took 2 to 3 days.
4, floor paint process
The basic process is: plate surface repair → anti -crack oil → slot tenon color closure → sand light → supplementary putty → UV curing → sand light → attached base oil → dry and curing → 上封闭底漆→ 干燥固化→上底漆→ UV固化→ 砂光→ 上底漆→ UV固化→ 砂光→上底漆→ UV固化→ 砂光→上底色→UV固化→ 上底漆→ UV curing → sand light → paint paint → UV curing → rolling paint → paint → UV curing → upper high performance surface paint → UV curing → split points, code → packaging → according to standards → qualified products → leave the factory → leave the factory → leave the factory → leave the factory → leave the factory → leave the factory → leave the factory → leave the factory → leave the factory → leave the factory → leave the factory → leave the factory → leave the factory → leave the factory → leave factory Essence The process took 3 to 5 days.
Professional production process of sports wooden floor panels:
1, screening panel
In Sports wood flooring with unlimited scars, decaying, insect eyes, collapsed, and small color difference;
2, panel drying
In order to regulate the balanced moisture content of sports wooden floors, it is necessary to dry the rough wood plate with a large humidity. Sports wood flooring at the grassroots level and waterproof protection installation of the panel head should be staggered and should be relatively well -properly uniformly kept to cook, abandoned and insect -proof; The machine is polished on the drying wooden floor panel;
4, anticorrosive treatment
This wood floor panels should be anticorrosive, such as coating anticorrosive coatings. Sports wooden floor panels also need to do termites prevention measures to ensure ant ants.